fix issue with printing scheme (FBD, LD or SFC) with comment element on GNU/Linux
If you draw FBD scheme and place comment on it and then try to print
it, then no wires will be printed and comment box is empty (text is
missing). This happens only for wx.PrinterDC and not on wx.MemoryDC
that is used to draw print preview window in Beremiz IDE.
Looks like a bug in wxPython or wxWidgets.
There were found several workaround for this issue.
1) If some dc.DrawLines call is placed before dc.DrawPolygon, then the
problem is gone.
...
dc.DrawLines(polygon)
dc.DrawPolygon(polygon)
...
2) Reseting DC brush solves the problem as well (see this changeset).
Beremiz installation
====================
Windows
-------
Download installer, install.
Linux
-----
Pre-requisites::
# Ubuntu/Debian :
sudo apt-get install python-wxgtk2.8 pyro mercurial
sudo apt-get install build-essential bison flex python-numpy python-nevow
Prepare::
mkdir ~/Beremiz
cd ~/Beremiz
Get Source Code::
cd ~/Beremiz
hg clone http://dev.automforge.net/beremiz
hg clone http://dev.automforge.net/plcopeneditor
hg clone http://dev.automforge.net/matiec
Build MatIEC compiler::
cd ~/Beremiz/matiec
./configure
make
Build CanFestival (optional)::
# Only needed for CANopen support. Please read CanFestival
# manual to choose CAN interface other than 'virtual'::
cd ~/Beremiz
hg clone http://dev.automforge.net/CanFestival-3
cd ~/Beremiz/CanFestival-3
./configure --can=virtual
make
Launch Beremiz::
cd ~/Beremiz/beremiz
python Beremiz.py